Strict Standards: mktime(): You should be using the time() function instead in /home/mikrokop/public_html/includes/function.php on line 1743
MKMX America LLC • Mikrokopter • MK Basicset Okto XL Blue - CFK Edition
font size
dot Inicio Carrito Firmar/Registrarse Contacto dot

MKMX America LLCMikrokopter


MK Basicset Okto XL Blue - CFK Edition


BLUE CFK EDITION: Blue rigger instead of red one, 8 strong CFK propeller included ANd two 6600 lipos


This is a kit to build a MK Okto XL (with BL-Ctrl V2.0).
As a control board is a FlightCtrl ME in the set.

Powerful engine - combination: 6600mAh LiPo (4s), 12"-EPP1245CF propellers and MK3638 Motor
With this set, much more payload can be transported. (like DSLR Canon 5D MarkII)

Hint: Please use the more flexible EPP1245 only for practicing without payload. For lfights with payload use always CFK-propellers!

Besides the standard components, the necessary parts such as cables, shrink tubing, etc. are also included. The BL-Ctrl2.0 are already assembled in the Okto XL power distributon board.

Thus, the building is almost 'out of the box' possible.
IMPORTANT: No receiver is included. Please order desired receiver separately!
Delivered products may differ from the picture - note the delivery!
The photo below shows the MK-Okto XL fully assembled (camera and camera mount not included)

Box / Kit Contents

  • 1x preassembled FlightCtrl ME V2.1
  • Altitude Sensor
  • 8x preassembled BL-Ctrl V2.0 assembled in Okto XL power distribution board
  • 1x MKUSB
  • 1x Okto Frame Set XL with anodized (coloured) riggers 1x (red, black 7x)
  • 4x HiLander-26
  • 1x black cap (can be painted from the inside)
  • 1x Transparent cap (can be painted from the inside)
  • 2x Lipo 6600/4s (FLAT version) - Y-cable for parallel usage also included
  • 2nd Recom for servo supply included
  • 4x pairs strong CFK1245/38 propeller
  • 8x pairs EPP1245 propeller
  • 8x MK3638 - black Brushless Motors
  • 1x connection cable for receiver
  • 1x LiPo Holder set
  • Heat shrink tubing for other solder joints
  • 4 pcs Flex LED Tape for lighting

What is missing?

  • IMPORTANT: No receiver is included. Please order desired receiver separately!
  • Transmitter
  • receiver crystal (only for 35Mhz or 40MHz receivers)
  • Lipo Charger (for example Ultramat 14 & Deans charging cable)
  • Please note the terms of the software with respect to commercial use


Fabricante Mikrokopter
Inventario 3 disponibles
Peso 4.0 lbs
add to wish


tell friend mail us


There is no comment. Why not be the first?

Average Ratings: empty starempty starempty starempty starempty star

read more Mas comentarios tuyos

smaller font normal font bigger font